Technology

 

MANUFACTURING OVERVIEW
   
Polymer Section
   
The Polymer Section is the main contributor to the seats' comfort, as it produces the high quality foam on our seat assemblies.
   
There are currently 3 turntables with individual mixing heads in our manufacturing plant, which includes a PIP headrest foaming line. Each carrier can carry between 12 to 16 moulds depending on the mould size.
   
Each turntable has a cycle time between 5 to 7 minutes. Pouring is done using a manual mixing head according to the established pouring patterns.
   
   
Each cured padding is placed into the PU crushing machine. There 2 units of crushing machine in our production plant, 1 roller type and 1 vacuum type.

 

 
 
Copyright © CNA Manufacturing Sdn Bhd 2009